View larger.

Capacitor storage allows for a discharge of 10 mj/10 nsecs = 1 Megawatt. View larger.

10 times more powerful than spark plugs. View larger.

Significant gains in horsepower, torque and MPG compared to factory spark plugs. View larger.

Go Green Generating More Power with Less Fuel
All gasoline engines require the efficient ignition of the fuel mixture compressed within them if they are to generate the energy needed to power a vehicle in as responsible a manner as possible. Historically, conventional spark plugs have been the only option, but with both the necessity of lessening the carbon footprint of individual drivers and the rise in fuel prices, there must be an alternative. Thankfully, today drivers concerned with living a green lifestyle can dispense with outdated spark plug technology that is not as clean as it should be and step into the modern era with Pulstar Pulse Plugs.

Pulstar Pulse Plugs may look similar to spark plugs on the outside, but inside the technological advances of Pulstar are evident. Pulse plugs feature a unique built-in capacitor-based circuit that captures energy normally wasted by spark plugs. This energy is released in an amazingly powerful and quick (two nanosecond) high-energy pulse, which generates a spark with 20,000 times greater energy than any spark plug. Because this energy is stored in the built-in capacitor of the pulse plug, rather than routed through the plug as with spark plugs, ignition is available at the exact moment needed, resulting in more efficient and cleaner combustion of the fuel mixture. This improved efficiency has a direct relation to improved fuel efficiency as more of the fuel mixture is burned, lower CO2 emissions and even increases in horsepower and torque. Independent test confirm the results of these efficiencies at up to 4.4 more in mpg and CO2 emissions reduced by a quarter ton annually.

Pulsed Power Technology
Pulsed power technology is the science of storing power for a relatively long period of time and then discharging the stored power in an instantaneous pulse of energy. Installing pulsed power technology in a performance auto part helps to increase horsepower (while being driven aggressively) and also helps to improve gas mileage during normal driving. A simple way to think about pulsed power technology is to think of Pulstar’s Pulse Plugs being the flash on a camera, whereas spark plugs are more like a flashlight. A camera flash is exponentially brighter than a flashlight even though they both may use the same battery. The spark comparison image to the right demonstrates the size brightness of a spark plug vs. a pulse plug. Here it is easy to see how much more energy is accumulated and dispersed to be used by your engine, which results in improved ignition velocity.

Ignition velocity refers to the growth of the combustion flame front, the speed of which determines the amount of energy released from the fuel. The greater the amount of ignition energy, the larger the spark. The larger the spark, the more efficiently your engine can operate to produce horsepower or, inversely, better fuel economy.

Key Features:

• Built-in capacitor element stores and delivers a much more powerful spark, providing for more complete combustion.
• Up to 10% better fuel economy.
• More precise and efficient combustion with fine-wire electrode.
• Individual CO2 emissions reduced by as much as a quarter ton annually.
• Cleaner overall exhaust.
• Platinum tip ensures increased plug durability.
• A lifetime limited warranty.

What’s in the Box
1-pack of 2 Pulstar BE1p Platinum Pulse Plugs.

Lifetime Limited Warranty
Pulstar Pulse Plugs are warranted by the manufacturer to the original purchaser to be free all defects in materials or workmanship for the lifetime of the plug. Proof of original purchase and the Enerpulse warranty registration required. This warranty is subject to additional terms and conditions specified with product.

About Enerpulse
Pulstar Plugs are manufactured by Enerpulse, Inc. Enerpulse is a privately held company, founded in 1996 and headquartered in Albuquerque, NM The company develops environmentally-friendly ignition products through the application of pulsed power technology.

View larger.

Capacitor storage allows for a discharge of 10 mj/10 nsecs = 1 Megawatt. View larger.

10 times more powerful than spark plugs. View larger.

Significant gains in horsepower, torque and MPG compared to factory spark plugs. View larger.

Generate More Power Using Less Fuel
All gasoline engines require ignition of the fuel mixture compressed within them to generate the energy needed to power a vehicle. Historically, conventional spark plugs have provided this, but with both the needs of performance minded drivers and fuel prices on the rise, there must be an alternative. Today drivers can dispense with outdated spark plug technology and step into the modern era with Pulstar Pulse Plugs.

Pulstar Pulse Plugs may look similar to spark plugs on the outside, but inside the technological advances of Pulstar are evident. Pulstar pulse plugs feature a unique built-in capacitor-based circuit that captures energy normally wasted by spark plugs. This energy is released in an amazingly powerful and quick (two nanosecond) high-energy pulse, which generates a spark with 20,000 times greater energy than any spark plug. Because this energy is stored in the built-in capacitor of the pulse plug, rather than routed through the plug as with spark plugs, ignition is available at the exact moment needed, resulting in more efficient and cleaner combustion of the fuel mixture, as much as a 10% increase in cylinder pressure, improved fuel efficiency and a guaranteed increase in horsepower and torque.

Pulsed Power Technology
Pulsed power technology is the science of storing power for a relatively long period of time and then discharging the stored power in an instantaneous pulse of energy. Installing pulsed power technology in a performance auto part helps to increase horsepower (while being driven aggressively) and also helps to improve gas mileage during normal driving. A simple way to think about pulsed power technology is to think of Pulstar’s Pulse Plugs being the flash on a camera, whereas spark plugs are more like a flashlight. A camera flash is exponentially brighter than a flashlight even though they both may use the same battery. The spark comparison image to the right demonstrates the size brightness of a spark plug vs. a pulse plug. Here it is easy to see how much more energy is accumulated and dispersed to be used by your engine, which results in improved ignition velocity.

Ignition velocity refers to the growth of the combustion flame front, the speed of which determines the amount of energy released from the fuel. The greater the amount of ignition energy, the larger the spark. The larger the spark, the more efficiently your engine can operate to produce horsepower or, inversely, better fuel economy.

Key Features:

• Built-in capacitor element stores and delivers a much more powerful spark, providing for more complete combustion.
• Up to 12% more horsepower and torque.
• More precise and efficient combustion with fine-wire electrode.
• Better throttle response and quicker ignition.
• Allows for higher towing capacity.
• Improved cold starts.
• A lifetime limited warranty and 30-day money back guarantee.

What’s in the Box
1-Pulstar be1i Iridium Pulse Plug.

Lifetime Limited Warranty and 30-day Customer Satisfaction Guarantee
Pulstar Pulse Plugs are warranted by the manufacturer to the original purchaser to be free all defects in materials or workmanship for the lifetime of the plug. Proof of original purchase and the Enerpulse warranty registration required. This warranty is subject to additional terms and conditions specified with product. Additionally, if for any reason you are not completely satisfied with your Plustar Plugs within 30-days of the purchase date on your receipt, you may return your order to the manufacturer for a full refund.

About Enerpulse
Pulstar Pulse Plugs are manufactured by Enerpulse, Inc. Enerpulse is a privately held company, founded in 1996 and headquartered in Albuquerque, N.M. The company develops environmentally-friendly ignition products through the application of pulsed power technology.

View larger.

Capacitor storage allows for a discharge of 10 mj/10 nsecs = 1 Megawatt. View larger.

10 times more powerful than spark plugs. View larger.

Significant gains in horsepower, torque and MPG compared to factory spark plugs. View larger.

Go Green Generating More Power with Less Fuel
All gasoline engines require the efficient ignition of the fuel mixture compressed within them if they are to generate the energy needed to power a vehicle in as responsible a manner as possible. Historically, conventional spark plugs have been the only option, but with both the necessity of lessening the carbon footprint of individual drivers and the rise in fuel prices, there must be an alternative. Thankfully, today drivers concerned with living a green lifestyle can dispense with outdated spark plug technology that is not as clean as it should be and step into the modern era with Pulstar Platinum Pulse Plugs.

Pulstar Platinum Pulse Plugs may look similar to spark plugs on the outside, but inside the technological advances of Pulstar are evident. Pulse plugs feature a unique built-in capacitor-based circuit that captures energy normally wasted by spark plugs. This energy is released in an amazingly powerful and quick (two nanosecond) high-energy pulse, which generates a spark with 20,000 times greater energy than any spark plug. Because this energy is stored in the built-in capacitor of the pulse plug, rather than routed through the plug as with spark plugs, ignition is available at the exact moment needed, resulting in more efficient and cleaner combustion of the fuel mixture. This improved efficiency has a direct relation to improved fuel efficiency as more of the fuel mixture is burned, lower CO2 emissions and even increases in horsepower and torque. Independent test confirm the results of these efficiencies at up to 4.4 more in mpg and CO2 emissions reduced by a quarter ton annually.

Pulsed Power Technology
Pulsed power technology is the science of storing power for a relatively long period of time and then discharging the stored power in an instantaneous pulse of energy. Installing pulsed power technology in a performance auto helps to increase horsepower (while being driven aggressively) and also helps to improve gas mileage during normal driving. A simple way to think about pulsed power technology is to think of Pulstar’s Pulse Plugs being the flash on a camera, whereas spark plugs are more like a flashlight. A camera flash is exponentially brighter than a flashlight even though they both may use the same battery. The spark comparison image to the right demonstrates the size brightness of a spark plug vs. a pulse plug. Here it is easy to see how much more energy is accumulated and dispersed to be used by your engine, which results in improved ignition velocity.

Ignition velocity refers to the growth of the combustion flame front, the speed of which determines the amount of energy released from the fuel. The greater the amount of ignition energy, the larger the spark. The larger the spark, the more efficiently your engine can operate to produce horsepower or, inversely, better fuel economy.

Key Features:

• Built-in capacitor element stores and delivers a much more powerful spark, providing for more complete combustion.
• Up to 10% better fuel economy.
• More precise and efficient combustion with fine-wire electrode.
• Individual CO2 emissions reduced by as much as a quarter ton annually.
• Cleaner overall exhaust.
• Platinum tip ensures increased plug durability.
• A lifetime limited warranty and 30-day money back guarantee.

What’s in the Box
1-Pulstar be1p Platinum Pulse Plug.

Lifetime Limited Warranty and 30-day Customer Satisfaction Guarantee
Pulstar Pulse Plugs are warranted by the manufacturer to the original purchaser to be free all defects in materials or workmanship for the lifetime of the plug. Proof of original purchase and the Enerpulse warranty registration required. This warranty is subject to additional terms and conditions specified with product. Additionally, if for any reason you are not completely satisfied with your Plustar Plugs within 30-days of the purchase date on your receipt, you may return your order to the manufacturer for a full refund.

About Enerpulse
Pulstar Plugs are manufactured by Enerpulse, Inc. Enerpulse is a privately held company, founded in 1996 and headquartered in Albuquerque, NM The company develops environmentally-friendly ignition products through the application of pulsed power technology.